Mobile Grain Feeders give farmers the convenience of filling the feeders up at a bin and taking them out to the field. They are ideal for rotational grazing systems. The MGF3800 is constructed by adding the tandem axle chassis system to the 3800 stationary feeder. The MGF1800 is constructed by adding the single axle chassis system to the 1800 stationary feeder.

• Both options have suspension. The MGF3800 has rocker load sharing suspension.
• The axles are centred on the feeder to ensure the vehicle tow ball is not over loaded.
• For stability in the field, each corner is fitted with an adjustable stand.

Mobile Feeders have suspension to ensure the longevity of the products by providing smooth transportation at higher speeds.

The MGF3800 features load-sharing springs to spread a full load evenly over all four wheels.

Mobile 3IN1FEEDERS have no maximum speed limit. Many others have a maximum of 25kph.

Centralised axles reduce the load on the tow ball of the towing vehicle. This is very important when the vehicle is a light-duty vehicle. Other products that have the axle at the rear of the feeder can put up to 800kg on the tow ball when many vehicles have maximum loading of 300kg.

The tires are only 500mm high, being 195/55/R13C and have a load rating of 900kg each. Stock can reach over the wheels to consume. Lambs less than 4 months of age consume besides the wheels.

The Mobile Grain Feeders have a stand in each corner. These prevent the Mobile Grain Feeders moving when in use.

The axles are manufactured with a step. This allows the Mobile Grain Feeders to be set at 3 different heights so they are suitable for all sizes of stock. The axle options allow the trough to be set at the heights of approximately 300, 400 and 500mm.